Damage testing
HBQ-401 Cable Tie Gun Tester
产品特点: ● Data display: It can simultaneously display real-time tension and peak tension; ● Data processing: Recording data during testing, with capabilities for data transmission and data clearance, facilitating data processing; ● Unit conversion: Kg and N unit conversion, and it can be set to power-on state; ● Force limit setting: Setting the upper and lower limits of the test force. An alarm prompt will be given when the testing force value is below the lower limit; ● System settings: Providing a corresponding settings interface for easy configuration of system parameters such as test upper and lower limits, calibration, and pull-off conditions.
产品资料:产品视频、说明书、图片
HBQ-401 cable tie gun tester is a special measuring equipments
used for detecting the force when the cable tie gun cuts the tie.
● Data display: It can simultaneously display real-time tension and peak tension;
● Data processing: Recording data during testing, with capabilities for data transmission and data clearance, facilitating data processing;
● Unit conversion: Kg and N unit conversion, and it can be set to power-on state;
● Force limit setting: Setting the upper and lower limits of the test force. An alarm prompt will be given when the testing force value is below the lower limit;
● System settings: Providing a corresponding settings interface for easy configuration of system parameters such as test upper and lower limits, calibration, and pull-off conditions.
Type |
HBQ-401 |
Measuring Range |
5~500N/0.5~50kg |
Measurement Accuracy |
±1% |
Power Supply |
AC220V/50Hz |
Sampling Frequency |
1kHz |
Power |
5W (Max) |
Overall Dimensions |
L210×W200×H255mm(Body) |
Weight |
10kg |
HBQ-052A Cross Section Analysis Center
This machine is designed professionally to guarantee high quality for wire harness industry. It will take 3~5minutes to go through procedures such as incision, erosion, cross-sectional image processing, testing analysis, records and so on.lt greatly improves the quality inspect speed. 查看详情HBQ-053 Cross Section Analysis Center
This measuring equipment designed professioanlly to guarantee high quality for wire harness industry,it will take 3~5minutes to go through procedures such as incision, erosion , cross-sectional image processing , testing analysis , records and so on. it improves the quality inspect speed of the terminal cross section greatly. 查看详情HBQ-061C Pull Force Tester
HBQ-06X Digital pull tester series are used to test the pull-out force of the crimped terminals, welded terminals and the seals. Embedded system is adopted with high efficiency, notable stability and high precision. HBQ-06X pull testers are able to integ 查看详情HBQ-064 Pull Force Tester
HBQ-06X Digital pull tester series are used to test the pull-out force of the crimped terminals, welded terminals and the seals. Embedded system is adopted with high efficiency, notable stability and high precision. HBQ-06X pull testers are able to integ 查看详情HBQ-065 Pull Force Tester
HBQ-06X Digital pull tester series are used to test the pull-out force of the crimped terminals, welded terminals and the seals. Embedded system is adopted with high efficiency, notable stability and high precision. HBQ-06X pull testers are able to integ 查看详情HBQ-411 PULL FORCE TESTER
HBQ-06X Digital pull tester series are specially used to test the pull-out force of the crimped terminals, welded terminals and the seals. Embedded system is adopted with high efficiency, notable stability and high precision. HBQ-06X pull testers are able to integrate the network port and meet the demands of networking in the modern factory. 查看详情