Photovoltaic equipment
HBQ-G207_Cutting and Riveting and Screwing Positive and Negative Machine
Product characteristics: Input line length device automatically identifies long and short lines and runs corresponding programs Pressure monitoring to ensure the stability of product crimping quality The assembly and processing of the connectors at both ends of the photovoltaic cable are completed on the same equipment The product transfer of each station is controlled by servo system, which is convenient for debugging, and the equipment is more flexible and more efficient Split into front and rear sections, processing one end of the product and then processing the other end to effectively improve the product yield
Product information:Product videos, instructions, pictures
HBQ-G207_Cutting and Riveting and Screwing Positive and Negative Machine is a kind of automatic photovoltaic cutting and riveting and screwing processing equipment, functions include, cutting (peeling), double-ended terminal riveting, both ends of the connector assembly, both ends of the connector nut tightening and other functions, the layout of the whole machine adopts the modularized design, the long line pendulum U double processing mode, high efficiency, convenient debugging, the equipment is mainly used for photovoltaic board end connector assembly, the important production process has detection, with wire alignment detection, pressure management detection, solder visual detection, wire through the connector in place detection, nut gap visual detection, to ensure that the quality of customers' finished products is reliable, no defective outflow.
HBQ-G207_Cutting and Riveting and Screwing Machine, the whole machine includes, 1 set of main machine, 1 set of pay-off stand, 1 set of wire storage stand, the main machine can process 150-3000 long wires. L<440mm short wires turn, L>440mm long line pendulum U. General wire diameter D5.7-D6.3 (4 square photovoltaic cable, pay-off stand can bear the maximum 1000KG coil (drum) incoming material, the storage frame is equipped with a tensioning structure, by adding or subtracting the counterweight block, the tension can be adjusted.
Input line length device automatically identifies long and short lines and runs corresponding programs
Pressure monitoring to ensure the stability of product crimping quality
The assembly and processing of the connectors at both ends of the photovoltaic cable are completed on the same equipment
The product transfer of each station is controlled by servo system, which is convenient for debugging, and the equipment is more flexible and more efficient
Split into front and rear sections, processing one end of the product and then processing the other end to effectively improve the product yield
Function |
Peeling、crimping terminal、solder, connector composition, screw the nut, CCD detection |
Universal Wire Diameter |
ɸ5.7~ ɸ 6.3 (4mm²)(Common, based on the actual cable) |
Wiring Method |
Belt Conveyor |
Capacity Efficiency |
Output:L=1500mm 3.5s/pcs;L>1500mm +2000mm/s |
Length Range |
150mm-3000mm |
Wire Feed Accuracy |
L<500mm土1 mm; L>500mm(l mm+0.2%L) |
Peeling Length |
Fixed peeling spacing, according to the actual peeling length to replace the corresponding thickness of the pad |
Pressure |
4.0T Terminal Machine(Pressure Management Options) |
Cramping Dies |
Horizontal Type: 30/40mm |
Pay-off Stand/Storage Line Stand |
HBQ-G103_Photovoltaic pay-off stand storage line stand 1000 type |
Host Size |
6000(L)x1000(W)x2200(H} 2800KG |
Overall Size |
10000(L)x2000(W)x2200(H} 3500KG |
HBQ-G102 Nut tightening machine apply to photovoltaic and energy storage connector wire harness
HBQ-G102 Nut tightening machine is a new generation of semi-automatic connector nut tightening equipment. The equipment is mainly composed of servo motor, encoder, PLC, photoelectric sensor and cylinder. The equipment has the function of error-proofing and fool-proofing. When the wrong products are put into the equipment, the equipment will not respond to start, which can effectively prevent the defective products from flowing into the next process. It has high tightening accuracy, simple operation, and stable performance, and saves manpower effectively. See detailsHBQ-G203 New Energy Wire Processing Machine
HBQ-G203_ The cutting, riveting and screwing integrated machine is a full-automatic photovoltaic cutting, riveting and screwing processing equipment. Its functions include cutting (stripping), terminal riveting, connector assembly, connector nut tightening and other functions. The overall layout adopts one out of two modular design, with high efficiency and convenient debugging. The equipment is mainly used for the assembly of photovoltaic panel end connectors, which can realize real-time monitoring of important processes, such as wire alignment detection, pressure management detection, solder visual detection Detect if the wire is not properly threaded through the connector, visually inspect the nut gap, etc., to ensure the reliable quality of the customer's finished products and reduce the outflow of defective products. See detailsHBQ-G205 Photovoltaic Connector Automatic Assembly Machine
HBQ-G205 is a fully automatic photovoltaic connector automatic assembly equipment, the layout of the whole machine adopts one out of a modular design, high efficiency, easy to debug, the equipment is mainly used for photovoltaic panel end connector assembly. Each assembly process is inspected, with O-ring assembly in place detection, waterproof inner plug skew detection, plastic nut tightening torque detection, plastic nut tightening gap detection. Each assembly process is inspected, with O-ring assembly in place detection, waterproof inner plug skew detection, plastic nut tightening torque detection, plastic nut tightening gap detection, bayonet and card Angle fracture/damage/missing detection, finished product 360-degree surface scratch/indentation/deformation detection, to ensure that customers finished product quality is reliable, no defective products out. HBQ-G205 machine includes: host, parts automatic loading system, CCD visual inspection system, laser marking system (optional), can be applied to all the same type of photovoltaic connector automatic assembly. See detailsHBQ-G207_Cutting and Riveting and Screwing Positive and Negative Machine
HBQ-G207 is a fully automatic photovoltaic wire cutting and riveting processing equipment that can process both ends of photovoltaic connectors. Its functions include cutting (peeling), double-end terminal riveting, assembly of connectors at both ends, and tightening of connector nuts at both ends. The overall layout adopts modular design, achieving short line turning and long line swing U dual processing mode, with high efficiency and convenient debugging. This equipment is equipped with wire alignment detection, pressure management detection, solder visual detection, wire threading connector penetration detection, and nut gap visual detection, ensuring reliable quality of customer finished products and no defective products flowing out. See detailsHBQ-G206 Photovoltaic Harness Automatic Machine
HBQ-G206 is a fully automatic photovoltaic cutting, riveting, twisting and winding cable tie processing machine, including cutting (stripping), terminal riveting, connector nut tightening, wire tie and other functions. The whole machine layout adopts modular design, high efficiency, easy debugging. And there are detection functions: such as wire alignment detection, cable stripping detection, pressure management detection, wire connector not in place detection, nut gap visual detection, to ensure the quality of customers' finished products is reliable, no defective products flow out, automatic grasp of the robot, cable winding, automatic tightening of the cable tie and cut off the tail of the cable, conveying material under the line, etc. HBQ-G206 photovoltaic wire harness automatic wire machine, the whole machine includes a set of cutting, riveting and screwing host, a set of pay-off rack, a set of wire storage rack, a set of wire winding and binding machine, the host can process 200-1800mm long wire, general diameter φ5.7~φ6.3 (1×4mm²) photovoltaic cable, pay-off rack can bear a maximum of 1000Kg coil (drum) material. See details