HBQ-963 EV wire processing center is a new generation solution launched by Hacint for the processing of electric vehicle shielded wires. It is applicable to the processing of shielded wire harnesses with a wire cross sections from 1.5 to 6 square millimeters.

●Multi-process integration

Manual feeding (including CCD accessory inspection)-automatic inner ring insertion-rotary cutting and stripping  outer insulation-cutting aluminum foil-stretching aluminum foil-mesh cutting-visual inspection of aluminum foil mesh cutting-mesh flipping-automatic assembly of inner and outer rings-crimping inner and outer rings-rotary cutting and stripping of inner insulation-visual inspection of inner stripping and crimping-terminal crimping-visual inspection of terminal crimping-automatic unloading.

●Miniaturization

The conventional dimensions of the equipment are L*W*H: 9000mm*1700mm*2200mm (customized according to customer requirements). While ensuring the same functionality, the equipment footprint has been reduced by about 50%, greatly improving the customer's site utilization rate.

● Efficiency improvement

 Each carrier of the equipment can hold four head wires, with single-head processing CT within 6S, achieving an efficiency improvement of over 50% compared to traditional equipment;
●FlexibilityThe processing parameters for the four wire ends can be independently executed through formula settings;● Quality assuranceIntegrated process inspection, where all processing parameters and inspection data can be uploaded to MES, ensuring traceability of product process quality.

• 

  HBQ-901 HARNESS PROCESSING CENTER

  The HBQ-901 harness processing center can perform the functions of cutting, stripping, sealing, crimping and inserting terminals into connector and it can process wires up to 6, saving a lot of manpower for wire harness manufacturers, effectively reducing the number of products in progress, increasing the company’s market response sensitivity and improving product quality. This product is suitable for the production of large order quantity and less than or equal to 6 kinds of wiring harness, and the relative efficiency is higher. This type of equipment adopts modular design ideas, can provide customized services, and flexibly adjust the station layout according to the actual production conditions of customers, which has good market applicability. 查看详情
  HBQ-901 HARNESS PROCESSING CENTER
• 

  HBQ-922 Double-Wire Twisting Center

  HBQ-922 double-wire twisting center integrates the functions of wire feeding and twisting. Enablingautomatic cutting, stripping, seal loading, crimping, twisting and tape binding and so on. This machine can efficiently process twisting wires with a conductor area ranging from 2×0.22mm² to 2×2.5mm². 查看详情
  HBQ-922 Double-Wire Twisting Center
• 

  HBQ-923 Fully Automatic Crimping And Twisting Machine

  HBQ-923 fully automatic crimping and twisting machine offers a new solution for processing automotive twisted wires. Developed based on an independently innovated and intellectually protected high-speed transfer platform and dual-wire processing platform, it automatically realize functions such as automatic cutting, stripping, seal loading, crimping, twisting, and tape wrapping of wire harnesses. The whole process is fast and efficient. At the same time, quality control can be carried out to ensure product quality. 查看详情
  HBQ-923 Fully Automatic Crimping And Twisting Machine
• 

  HBQ-926 Double-Wire Twisting Center

  HBQ-926 Double-Wire Twisting Center is a wire harness intelligent manufacturing system with independent intellectual property rights developed by Hacint. It is mainly used for the production of wire harnesses in motor vehicles, communication equipment, IT equipment, home appliances, etc. This manufacturing system can automatically perform functions such as automatic cutting, stripping, seal loading, and crimping of wire harnesses. Finally, the processed wires are automatically twisted and tape spot bundled. Quality control is carried out throughout the process to ensure product quality. 查看详情
  HBQ-926 Double-Wire Twisting Center
• 

  HBQ-G509 Multi-Wire Splicing Machine

  HBQ-G509 is a highly efficient automatic machine for multi-wire splicing U-shaped terminals. It can perform functions such as automatic wire cutting, stripping, crimping, terminal crimping detection, automatic wire splicing, loading heat shrinking, crimping U-shaped terminals, splicing visual inspection, and heat shrinking. The whole machine is arranged with 3 independent single-end crimping and unloading workstations and 1 multi-wire splicing workstation. It can simultaneously crimp and unload 3 different types of wire harnesses and terminals. It also adopts pressure management to monitor the crimping stability and uses vision for crimping appearance inspection to ensure the high-efficiency, stability and reliability of the equipment. This equipment is suitable for the production of combined and crimped wire harness products with 4-in-4 or less. It can be customized according to product characteristics and production capacity requirements, and can be applied to the production of combined and crimped wire harnesses in industries such as home appliances and automobiles, which can greatly reduce the production cost of enterprises and improve production efficiency. 查看详情
  HBQ-G509 Multi-Wire Splicing Machine
• 

  HBQ-903 Control Cabinet Wire Harness Processing Center

  HBQ-903 is an automated processing center developed for the power distribution cabinet industry. It can achieve functions such as automatic wire feeding, stripping, number tube loading, thermal printing, automatic material selection for various types of discrete terminals, automatic jaw switching for crimping, visual inspection of product appearance, and automatic wire collection and bundling. The improvement of the automation level can perfectly address the shortcomings of traditional manual operations, such as complex processes, high labor intensity, and inability to guarantee quality. This equipment adopts a modular design concept and can provide customized services. It can flexibly adjust the workstation layout according to the actual production situation of customers, and has good market adaptability. 查看详情
  HBQ-903 Control Cabinet Wire Harness Processing Center