Multifunctional equipment
HBQ-922 DUAL-WIRE TWISTING CENTER
Product characteristics： 绞合线 Twist pairs 穿栓 Seal insertion 裁切 Cutting 双头压接 Crimp to crimp 半剥皮 Half stripping 全剥皮 Full stripping 实现精密切剥 Precise cut and strip 压接端子 Crimping 喷墨打标 Inkjet marking 料带切断 Terminal strip cutting 纸带收集 paper winder 成品自动收集
Product information：Product videos, instructions, pictures
HBQ-922 is a machine that processes twisted pairs, for automatically cutting, stripping, seal inserting, crimping and twisting. Wires with cross sections ranging from 2 × 0.3 mm² to 2 × 2.5 mm² can be processed efficiently.
● Labor Save: can realize cutting, crimping, seal inserting and twisting at the same time;
● Moving Save: remove the material moving from crimping machine to twisting machine;
● High Efficiency: the highest processing efficiency can be up to 4.5s;
● Pitch length Accuracy: within ±10%;
● High flexibility: process of twisted pairs, single wires and dual wires.
| Type | : | HBQ-922 |
| Wire Cross Sections | : | 0.3~2.5mm² |
| Wire Length | : | 300~4000mm |
| Machining Accuracy | : | ±（0.3%L+1.5mm）,L表示线长 （ Wire length） |
| Stripping Length | : | 0.1~18mm |
| Open Length ends | : | 35~90mm |
| Pitch Length | : | 5~80mm accuracy:±10% |
| Feeding Speed | : | 3m/s |
| Noise level | : | <75dB(Without crimping) |
| Temperature | : | -5~+40℃ |
| Air Supply | : | 0.5~0.7MPa |
| Power Supply | : | 3×380V/50Hz |
| power | : | 8kW(max) |
| Dimensions | : | L9000×W2200×H2000 |
| FSA-001 Seal loading machine FSA-001 | ||
| Optional Accessories | DOS Servo crimping machine | |
| Frequency conversion crimping machine | ||
| Shut height measurement module | ||
| Terminal Pull Force detection module | ||
|
|
HBQ-901 HARNESS PROCESSING CENTER
The HBQ-901 harness processing center can perform the functions of cutting, stripping, sealing, crimping and inserting terminals into connector and it can process wires up to 6, saving a lot of manpower for wire harness manufacturers, effectively reducing the number of products in progress, increasing the company’s market response sensitivity and improving product quality. This product is suitable for the production of large order quantity and less than or equal to 6 kinds of wiring harness, and the relative efficiency is higher. This type of equipment adopts modular design ideas, can provide customized services, and flexibly adjust the station layout according to the actual production conditions of customers, which has good market applicability. See details
HBQ-902 HARNESS PROCESSING CENTER
The HBQ-902 harness processing center can perform the functions of cutting, stripping, sealing, crimping and inserting terminals into connector and it can process wires up to 36, saving a lot of manpower for wire harness manufacturers, effectively reducing the number of products in progress, increasing the company’s market response sensitivity and improving product quality. The device can adapt to the situation of simultaneous insertion with multiple sheaths, and has better compatibility with a variety of insertion ends and complex insertion techniques. This type of equipment adopts modular design ideas, can provide customized services, and flexibly adjust the station layout according to the actual production conditions of customers, which has good market applicability. See details
HBQ-906 Fully Automatic Cable Processing Machine
HBQ-906 full-automatic wire harness plugging machine adopts sophisticated mechanism and flexible and intelligent control system to realize fixed-length cutting, double-end skinning, double-end crimping, double-end inserting sheath, and adopts vibration disk to automatically put on sheath. It is a customized equipment for short wire plugging sheath, providing customers with personalized equipment with higher cost performance. See details
HBQ-903 control cabinet harness processing center
HBQ-903 is an automatic processing center developed for the power distribution cabinet industry, which can realize automatic cutting, stripping, tube threading, hot printing, automatic material selection of various kinds of loose terminals, automatic switching crimpers. visual inspection of product appearance, automatic cable binding. See details
HBQ-922 DUAL-WIRE TWISTING CENTER
HBQ-922 is a machine that processes twisted pairs, for automatically cutting, stripping, seal inserting, crimping and twisting. Wires with cross sections ranging from 2 × 0.3 mm2 to 2 × 2.5 mm2 can be processed efficiently. there are following features: See details
HBQ-180A PROCESSING CENTER
HBQ-180A is specially designed for large wire of the new energy industry, with automatic functions of stripping, crimping, heat shrinkable and CCD+ robot to automatically detect materials. It’s more universal and intelligent. See details
